Large Remote Control Lawn Mower 4 Stroke Safety Level 55 Deg

1.Yanmar 3-cylinder 4-stroke water-cooled direct injection engine, 28.2KW diesel engine, the maximum horsepower is about 40 horsepower, the maximum speed is <3200.

2. Italy imported hydraulic system, electric proportional servo system.Original imported hydraulic pump

3.Hydraulic motor double drive travel, France Poclain travel motor

The motor has a two-speed system, autonomous parking and remote parking, low-speed maximum speed of 4km/h, high-speed 8.6km/h. It can be remotely controlled, so that the machine can be easily changed in different operating environments, and the control is more convenient and quick. All low-speed ranges Support 0 to the highest speed stepless speed regulation

4.Support omnidirectional maximum tilt angle 55-60 degrees

5.Independently researched and developed two-way fan system to support regular and mandatory cleaning of the cooler cover (optional)

6.Increased rubber track to support the grip under large-angle working conditions

7.Cooling system

The customized oil-water integrated heat dissipation system can achieve effective heat dissipation under any environment allowed by the machine.

8.Hydraulic accessories

Hydraulic hose (Continental brand). Pipe joints. Oil pipe quick joints (Spain), fuel tank filters, cylinder components. Solenoid valve components

Remote control and various sensors

1.The maximum support remote control distance of 200 meters, the tentative remote control frequency is 433. Exports need to consult each country whether this frequency is restricted, and it can be changed according to the exporting country

2.All operations can be realized by the remote control. This machine, all functions, are all realized by remote control. It has double-layer safety measures, the machine has its own emergency stop button, and the program is set with emergency stop (the receiver receives within 2 seconds) (If there is no signal, the machine will automatically turn off)

3.Over-angle protection (greater than 55 degrees) to prevent overturning, add an angle sensor, during driving, due to terrain changes, greater than the machine's limit angle, the machine will automatically alarm to prevent misoperation and cause overturning

4.Supports in-situ steering function. Dual joystick operation, supports in-situ turns, supports walking fine-tuning turns, and supports cruise control (optional)

5.Supports active correction of slope work. In slope work, due to the excessive angle, the weight of the machine will tilt. The tilt angle sensor is added, and the program sets the brake correction, which is easy to control and more convenient (optional)

6.The speed of the mower is 0-3000rpm, both positive and negative rotations support stepless speed regulation. The remote control can control the speed of the mower steplessly, and it can also provide free switching of the forward and flip of the mower, which can be adapted to a variety of cutting environments. Improve work efficiency.

7.Supports joystick direction switching to meet the convenient control and control of the front driving and the rear driving. Through the knob switch, the forward and backward directions can be switched, which is faster and does not need to turn around.

8.The parking switch ensures that the equipment is parked steadily. Through the parking knob, the machine can be parked on the spot, and the electronic handbrake function can be realized. The safety performance is effectively guaranteed and the safety accident caused by the misoperation is effectively prevented.

9.Equipment maintenance monitoring, real-time monitoring of water temperature, oil temperature, oil level, speed, blockage, to ensure the working status of the equipment, through the receiver display screen, the status of the whole vehicle can be monitored in real time, and the sensor can be used to find out whether the machine is operating normally. Software upgrades can be achieved through reserved ports, allowing customers to experience the latest features.